Call Waiting

Thank you for choosing the Call Waiting feature. Below are the features and instructions to use Call Waiting.

With Call Waiting you will not miss any important telephone calls. When you are on the telephone with one person, you will be notified by a call waiting tone that there is another call for you to take. Without having to end your first conversation, you can answer the second call.

To use:

1. When you hear the call waiting tone you can press the Flash Key to put the first caller on hold.
2. You will now be answering your second call. The first caller will be on hold and will not be able to hear anything.
3. To switch between callers, you need to press the Flash Key.
4. To disconnect one of the calls, hang up. You will be automatically switched over to the other caller.

To turn off Call Waiting before placing a telephone call:

1. Prior to placing a call, you must activate "Cancel Call Waiting".
2. Pick up the receiver and listen for dial tone.
3. Dial the activation code *70.
4. A dial tone will confirm your Call Waiting cancelation for that particular call.
5. Dial the telephone number you want to call.
6. Once you hang up, Call Waiting is active again.

To turn off Call Waiting during an existing call:

1. While on your call, quickly press and release the Flash Key.
2. Listen for dial tone.
3. Dial *70.
4. Listen for dial tone.
5. You will automatically be reconnected to your existing call
   

Feature Considerations:

• You will receive call waiting tones only when in a talking state, not during dialing, waiting for an answer, or hearing a busy signal.
• If you do not answer the second call within 10-30 seconds, then a second tone is applied. No other tones are applied after the second tone.